02.02.04.01 |
Hand-fed cycle presses |
02.02.04.03 |
Block cycle presses for laminating |
02.02.04.04 |
Cycle presses for laminating of moulded parts |
02.02.04.05 |
Membrane presses |
02.02.10 |
Equipment for glue preparation, proportioning and transport |
02.03.02.02 |
Radial arm saws |
02.03.06 |
Single blade circular saws with moving saw unit |
02.03.07 |
Single- and multi-blade circular saws for edging or ripping |
02.03.10 |
Sliding table saws |
02.03.11 |
Vertical panel saws |
02.03.12.01 |
Horizontal panel saws with pressure beam for longitudinal cuts |
02.03.12.02 |
Horizontal panel saws with pressure beam for cross cuts |
02.03.12.03 |
Horizontal panel saws with pressure beam for longitudinal and cross cuts (angular system) |
02.03.14 |
Narrow band saws |
02.03.21 |
Optimizing rip saws |
02.04.01 |
Surface planers |
02.04.02 |
Thickness planers |
02.04.03 |
Scraper machines |
02.04.04 |
Planing / sawing machines |
02.04.05 |
Planer / sander combinations |
02.04.07 |
Two-side thicknessing planers for surfacing and thicknessing in one operation |
02.04.08 |
Three- and four-side planers |
02.04.09 |
Moulding machines for three-and four-side machining |
02.04.11 |
Single-spindle moulders |
02.06.01.01 |
Single-end tenoners for straight tenons |
02.06.01.02 |
Double-end tenoners for straight tenons |
02.06.02.01 |
Single round end tenoners |
02.06.02.02 |
Double round end tenoners |
02.07.01 |
Single?end profilers / sizing machines for non?flat parts, e.g. scantlings |
02.07.02 |
Single?end profilers / sizing machines for flat parts, e.g. panels |
02.07.03 |
Double?end profilers / sizing machines for non?flat parts, e.g. scantlings |
02.07.04 |
Double?end profilers / sizing machines for flat parts, e.g. panels |
02.08.01.01 |
Single-end edge banding machines for straight edges |
02.08.01.02 |
Single-end edge banding machines for softforming |
02.08.01.03 |
Single-end edge banding machines for shaped / curved parts |
02.08.02.01 |
Double-end edge banding machines for straight edges |
02.08.02.02 |
Double-end edge banding machines for softforming |
02.08.02.03 |
Double-end edge banding machines for shaped / curved parts |
02.08.03 |
Table edge banding machines |
02.09.01.01 |
Single-end sizing and edge banding machines for straight edges |
02.09.01.02 |
Single-end sizing and edge banding machines for softforming |
02.09.01.03 |
Single-end sizing and edge banding machines for shaped / curved parts |
02.09.02.01 |
Double-end sizing and edge banding machines for straight edges |
02.09.02.02 |
Double-end sizing and edge banding machines for softforming |
02.09.02.03 |
Double-end sizing and edge banding machines for shaped / curved parts |
02.10.02.01 |
Postforming machines for laminates |
02.10.02.02 |
Direct-postforming machines for laminated / veneered panels |
02.11.02 |
Mitre cutting machines for cross-folding |
02.12.01.01 |
Universal multispindle boring machines, stationary processing |
02.12.01.02 |
Multispindle boring machines with horizontal and / or vertical heads, stationary processing |
02.12.01.03 |
Through feed multi-spindle boring machines with horizontal and / or vertical heads |
02.12.02 |
Dowel hole boring machines for rack, frame and other prismatic components, stationary or through feed processing |
02.12.03 |
Boring machines for sawing, moulding, boring and dowel-driving |
02.12.04 |
Machines for boring, milling, hardware inserting, etc. |
02.12.05.01 |
CNC boring machines for stationary processing |
02.12.05.02 |
Through feed CNC boring machines |
02.12.06 |
Dowel driving machines (gluing, driving-in) |
02.12.07 |
Machines for hardware inserting |
02.15.03 |
Profiling lathes |
02.15.04 |
Copying lathes with tool control by template |
02.15.05 |
CNC lathes |
02.16.01 |
Longbelt sanders with table |
02.16.03 |
Wide-belt sanders |
02.16.04 |
Cross-belt / wide-belt sanders |
02.16.05 |
Veneer sheet sanders |
02.16.06 |
Abrasive calibrating machines |
02.16.07 |
Wide-belt sanders for calibrating and sanding |
02.16.08 |
Drum sanders for surface sanding |
02.16.10 |
Sanders for intermediate lacquer sanding |
02.18.01 |
Bending machines |
02.18.02.01 |
Stationary embossing machines |
02.19.01 |
Surfacers and thicknessers |
02.19.02 |
Combined circular saws and moulders |
02.19.04 |
Combined circular saws, surfacers, moulders and slot mortisers |
02.19.05 |
Universal combined machines for carpentry and joinery |
02.19.06 |
Universal combined machines for DIY |
02.19.99 |
Combined machines; other |
02.20.01 |
Machining centres for sawing, routing, profiling, boring, sanding |
02.20.02 |
Machining centres for edge-banding |
02.20.03 |
Machining centres for routing, sawing, boring, edge banding |
02.20.04 |
Machining centres for routing, sawing, boring, hardware and dowel inserting, etc. |
02.21 |
Manufacturing cells |
02.22.01 |
Vertical edge joint gluing machines |
02.22.02 |
Continuous feed edge joint gluing presses for boards and scantlings |
02.22.03 |
Core composer / board gluing machines |
02.22.04 |
Laminated timber presses / clamps for construction timber, glulam, etc. |
02.23.02 |
Frame clamps |
03.01.01.02 |
Texturing / brushing machines |
03.01.01.03 |
Cleaning brushes |
03.01.02 |
Bleaching and staining plants |
03.01.03 |
Filler applying machines by knife or roller |
03.01.04 |
Printing (e.g. wood grain) plants |
03.01.05 |
Automatic spraying machines / robots for spray finishing |
03.01.08 |
Curtain coaters |
03.01.09 |
Roller coaters |
03.01.11 |
Dipping equipment |
03.01.12 |
Flooding systems |
03.01.13 |
Edge coating systems |
03.01.15 |
Spray walls and booths |
03.01.16 |
Lacquer drying and curing lines |
03.01.17 |
Conveyers for lacquering plants |
04.01.02.02 |
Pre-clamping station |
04.01.02.03 |
Carcass clamps |
04.01.03 |
Final assembly work stations for furniture parts, carcass furniture |
04.01.04 |
Final assembly lines for furniture |
04.02.02 |
Stapling and stitching machines |
04.03.01 |
Packaging machines for furniture parts and carcass furniture |
04.03.02 |
Packaging machines for flat parts (floor elements, panels, etc.) |
04.03.03 |
Packaging machines for boards, custom sized boards, etc. |
04.03.99 |
Packaging machines; other |
05.01.05 |
Vacuum lifting equipment |
05.01.06 |
Infeed units |
05.01.07 |
Outfeed and stacking units |
05.01.08 |
Board turning stations |
05.01.09 |
Angle transfer stations |
05.01.10 |
Cross conveyors |
05.01.11 |
Reverse conveyors |
05.01.12.01 |
Driven roller conveyors |
05.01.12.02 |
Undriven roller conveyors |
05.01.13 |
Belt conveyors |
05.01.17 |
Roller stands |
05.01.90.99 |
Specialised materials handling technology; other |
06.03 |
Robots for spraying, lacquering, etc. |
10.01 |
Laser technology |
10.02 |
High frequency technology |
10.03 |
Microwave technology |
11.01.01.01 |
Processing centres for longitudinal and cross-wise processing of window parts |
11.01.01.99 |
Machines for windows and facades; other |
11.01.02 |
Machines and plants for doors and frames |
11.01.03.01 |
Trimming lines |
11.01.03.02 |
Special machines for carpenters and building industry |
11.01.04.03 |
Machining centres for structural elements |
11.01.05 |
Machines and equipment for glue laminated timber / glulam construction |
11.01.06 |
Machines and equipment for timber flooring / parquetry |
11.01.07 |
Machines and equipment for laminate floorings |
11.01.08 |
Machines and equipment for stair construction |
11.02 |
Machines and equipment for manufacturing solid timber boards |
11.03 |
Machines and equipment for manufacturing rack furniture (chairs, tables, etc.) |
11.05 |
Machines and equipment for manufacturing doors for furniture |
11.06 |
Machines and equipment for manufacturing drawers |
11.09.02 |
Machines for processing insulating materials |
11.99.07 |
Machines and plants for furniture handles |
11.99.08 |
Machines and plants for louvres and shutters |
11.99.09 |
Machines and plants for coffins |
11.99.10 |
Machines and plants for shuttering panels |
22.99.10 |
Belt sanding pads |
80.01.05 |
General contractors for furniture production plants |
80.01.06 |
General contractors for solid wood processing plants |
80.01.07 |
General contractors for plants for manufacturing of wooden construction elements (windows, facades, etc.) |
80.01.10 |
General contractors for solid wood parquetry plants |
80.01.11 |
General contractors for plants for solid wood panel production |